CHT-R5500 RFID1 Meter Middle Range Card Reader with 125Khz
1 Meter Middle Range Card Reader, it Widely used automated parking management system, personal identification, access controller, production access control etc.
￥ 0.00
0.00
1 Meter Middle Range Card Reader, it Widely used automated parking management system, personal identification, access controller, production access control etc.
CHT-R5500 Reader
1 Meter Middle Range Card Reader with 125Khz,Frequency:125Khz; Wiegand 26/34, RS232/485 communication; Reader Range 70-100cm. it Widely used automated parking management system, personal identification, access controller, production access control etc.
Specification：
Color: Dark Grey
Size: 260*260*35(mm)
Working Voltage： DC 12V
Static Current：≤100mA
Reading Range：70-100CM
Card Type: EM-ID Card / Special EM-ID Middle Range Card
Ambient Temperature：-10℃～70℃
Ambient Humidity：10%～90%
International Standard Wiegand Interface
More than 100M Communication Distance
Installation： Using “+”type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection：
Red DC 12V
Black GND
Green D0
White D1
Notice:
Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
When external Power is used, make sure sharing the power with Controller Box or using the same GND
When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square centimeter, or using several parallel Network wires.
